Bissell Bolt Pet Blinking Red Light When Charging

0 Comments


Bissell Bolt Pet Blinking Red Light When Charging: Troubleshooting Guide

If you are a pet owner, you understand the challenges of keeping your home clean and free from pet hair and messes. Bissell, a renowned brand in the cleaning industry, offers a range of products to address these issues, including the Bissell Bolt Pet. However, you may encounter a common problem while charging this versatile cleaning tool – a blinking red light. In this article, we will delve into the possible causes and troubleshooting steps to resolve this issue. So, let’s get started!

Understanding the Bissell Bolt Pet and its Charging Process

The Bissell Bolt Pet is a cordless stick vacuum designed specifically for pet owners. With its powerful suction and specialized pet tools, it makes cleaning up pet hair and messes a breeze. The Bolt Pet comes with a rechargeable battery that provides the necessary power for efficient cleaning.

When you connect your Bolt Pet to the charger, the charging process begins. Normally, a solid red light indicates that the vacuum is charging, and it will turn green when fully charged. However, if you notice a blinking red light during the charging process, it indicates a problem that needs your attention.

Possible Causes of the Blinking Red Light

1. Battery Overheating: One potential cause of the blinking red light is that the battery may be overheating. This often occurs when the vacuum has been used extensively and the battery becomes too hot. The blinking red light serves as a safety feature to prevent any damage to the battery or the vacuum.

See also  How Many Suitcases Fit In Tesla Model 3

2. Battery Malfunction: Another possible cause of the blinking red light is a malfunctioning battery. Over time, batteries can wear out or develop faults, resulting in charging issues.

3. Charging Dock Connection: The blinking red light can also occur if the vacuum is not properly connected to the charging dock. Make sure the vacuum is securely attached to the dock, and the charging pins on both the vacuum and the dock are clean and free from any debris.

Troubleshooting Steps to Resolve the Issue

If you encounter the blinking red light while charging your Bissell Bolt Pet, here are some troubleshooting steps you can follow:

1. Allow the Vacuum to Cool: If the blinking red light is due to battery overheating, disconnect the vacuum from the charger and allow it to cool down for approximately 30 minutes. Once it has cooled, reconnect it to the charger and check if the light stops blinking.

2. Clean the Charging Pins: Ensure that both the charging pins on the vacuum and the charging dock are clean and free from any dirt or debris. Use a soft cloth or a cotton swab to gently clean them.

3. Check the Power Outlet: Confirm that the power outlet you are using is functioning properly. Try plugging in another device to ensure that the outlet is providing power.

4. Replace the Battery: If none of the above steps resolve the issue, it is possible that the battery has malfunctioned. In this case, you may need to replace the battery. Contact Bissell customer support or refer to the user manual for guidance on obtaining a replacement battery.

See also  Why Is My Tesla Screen Frozen

FAQs

Q1. Why is my Bissell Bolt Pet not charging at all?
A1. If your Bissell Bolt Pet is not charging at all, check the power outlet, make sure the vacuum is properly connected to the charging dock, and clean the charging pins. If the issue persists, contact Bissell customer support for further assistance.

Q2. How long does it take for the Bissell Bolt Pet to fully charge?
A2. The Bissell Bolt Pet typically takes around four hours to fully charge. However, charging times may vary depending on the battery’s initial charge level and other factors.

Q3. Can I use my Bissell Bolt Pet while it is charging?
A3. No, it is not recommended to use the Bissell Bolt Pet while it is charging. Allow the vacuum to fully charge before using it to ensure optimal performance.

Q4. Can I use a generic battery for my Bissell Bolt Pet?
A4. It is recommended to use a genuine Bissell replacement battery for your Bissell Bolt Pet. Using a generic battery may result in compatibility or performance issues.

In conclusion, encountering a blinking red light while charging your Bissell Bolt Pet can be frustrating, but it is a common issue that can be resolved with some troubleshooting. following the steps mentioned in this article, you can identify the cause of the blinking light and take appropriate action to resolve the problem. Remember to consult the user manual or contact Bissell customer support if you need further assistance or require a replacement battery. Happy cleaning!